Pod komínom 10, 080 01 Prešov, Slovakia +421 905 637 714 palco@palcoit.eu


PALCO IT, s.r.o. | Industrial technologies | Posts | Development KIT
!!!Warning shock hazard!!! High currents and high voltages, on the primary side galvanic connected with mains, may be hazardous, even lethal. Hence, the driver should be operated by qualified technicians only. PALCO IT takes no responsibility for any consequence that may result from the use of this document or the application described herein.

The development kit ACDC PFC 44 is the comprehensive set for the test and preproduction of the 44W LED driver, with active Power Factor correction. Topology is the typical FlyBack operating in quasi resonant mode. There is optimized for 12 LED string with nominal current 1,05A. Applications: home LED lighting, office panel LED lamps, industry high bay lamps, street LED lighting.
Input max. 44W
Configurable 700mA
Current 1,05A
Voltage 40V - (184VAC to 253VAC)
Power factor 0,93
Efficiency 89%
Frequency 47Hz to 63Hz
Insulation voltage (prim. sec.) 3kV (6sek.)
Safeness SELV
Operation temperature -20°C to +45°C
Storage temperature -20°C to +55°C
Optimized for 12pcs. @3W
Dimensions 89mm x 55mm x 35mm
Specification IEC61000-3-2
Safety specification EN61347-2-13
Low electromagnet. interference EN55015:2010